<track id="xzbz5"><ruby id="xzbz5"><b id="xzbz5"></b></ruby></track>

    <pre id="xzbz5"><del id="xzbz5"></del></pre>

        <ruby id="xzbz5"><b id="xzbz5"><b id="xzbz5"></b></b></ruby>

        <pre id="xzbz5"></pre>

        Temp cycling chamber


        GL series introduction: this chamber is suitable for the product (complete machine), parts, materials to perform high temperature test, low temperature test and high&low temperature cycling test (cooling start point from high temperature ≤90℃). This chamber cannot be used for the test of heat emission samples. And when the temperature is higher than 90℃, the refrigeration system of the chamber cannot be opened for the cooling requirement.
         
         
         GL4 series detailed parameters
        Type GL401F GL4025F GL405F GL41F
        Performance parameters Temperature range -40℃~150℃
        Temperature fluctuation ≤1℃(≤±0.5℃, according to GB/T5170-1996)
        Temperature deviation ±2℃
        Heating up time(room temperature →+150℃) ≤60min ≤65min ≤65min ≤80min
        Cooling down time(room temperature→-40℃) ≤70min ≤75min ≤90min ≤80min
        Structure Shell Cold-rolled steel plate with two-sided electrostatic spray powder(ivory)
        Inner wall material Stainless steel plate
        Thermal insulation material Rigid polyurethane foam
        Refrigeration Refrigerating method Air cooling
        Refrigerator Imported compressor
        Observation window 200×270mm
        (W×H)
        300×400mm
        (W×H)
        400×500mm
        (W×H)
        Test hole One, at the left side two, one at the left and the other one at the right
        Inner dimension(mm) D 400 600 700 1020
        W 500 600 800 950
        H 550 670 870 1070
        External dimension(mm) D 1290 1470 1675 2015
        W 700 800 1000 1150
        H 1712 1660 1860 2060
        Installed power 4KVA 6.3KVA 8.5KVA 11KVA
        Power supply 380V±10%,50Hz±1 three phase four wire + ground wire and grounding protection resistance is less than 4Ω
         
         
         
         
        GL6 series detailed parameters
         
        Type GL601F GL6025F GL605F GL61F
        Performance 
        parameters
        Temperature range -70℃~150℃
        Temperature fluctuation ≤1℃(≤±0.5℃, according to GB/T5170-1996)
        Temperature deviation ±2℃
        Heating up time(room temperature →+150℃) ≤60min ≤65min ≤80min ≤70min
        Cooling down time(room temperature →-60℃) ≤60min ≤80min ≤80min ≤80min
        Structure Shell Cold-rolled steel plate with two-sided electrostatic spray powder (ivory)
        Inner wall material Stainless steel plate
         
        Thermal insulation material Rigid polyurethane foam
        Refrigeration Refrigerating method
         
        Air cooling
        Refrigerator    Imported compressor
        Observation window 200×270mm
        (W×H)
        300×400mm
        (W×H)
        400×500mm
        (W×H)
        Test hole One, at the left side two, one at the left and the other one at the right
        Inner dimension(mm) D 400 600 700 1020
        W 500 600 800 950
        H 550 670 870 1070
        External dimension(mm) D 1290 1470 1675 2015
        W 700 800 1000 1150
        H 1712 1660 1860 2060
        Installed power 5.5KVA 7KVA 10KVA 12.5KVA
        Power supply 380V±10%,50Hz±1 three phase four wire + ground wire and grounding protection resistance is less than 4Ω

        Chongqing Yinhe Experimental Equipment CO.,LTD. 2012 渝ICP備09054543號 技術支持:Hansa
        欧美精品九九99久久在免费线_久久国产亚洲欧美久久_欧美91精品久久久久网_久久综合久久综合九色