<track id="xzbz5"><ruby id="xzbz5"><b id="xzbz5"></b></ruby></track>

    <pre id="xzbz5"><del id="xzbz5"></del></pre>

        <ruby id="xzbz5"><b id="xzbz5"><b id="xzbz5"></b></b></ruby>

        <pre id="xzbz5"></pre>

        Thermal shock chamber


        Introduction of ventilation-type (three rooms) thermal shock chamber: this chamber is suitable for the product (complete machine), parts, materials to estimate the ability of bearing speedy temperature change. This test can know the influence caused by the temperature variation one or more times on the test samples. The main parameters to influence the temperature change test have the max value and min value of temperature change range, the hold time of the samples under high temperature and low temperature, the number of test cycle, etc.
         
        CJS3 series technical parameters
        Type CJ602S3 CJ603S3 CJ605S3
         
        Performance parameters
        Preheating
        room
        Upper limit of preheating temperature 200℃
        Temperature increasing time R.T.→+200℃約40min
        Pre-cooling room Lower limit of pre-cooling temperature 0~-75℃
        Temperature decreasing time R.T.→-70℃約90min
        Workroom Thermal shock range High temperature 60℃~+150℃;low temperature -55℃~-10℃
        Temperature fluctuation ≤±0.5℃
        Temperature deviation ≤±2℃
        Temperature recovering time ≤5min
         
        Temperature recovery conditions
        CJ602S3I condition 1 exposure in high temperature 125℃,exposure in low temperature -40℃,exposure duration 30min,sample weight 10Kg Al
        condition 2 30min exposure in high temperature 150℃, 5min in environment temperature, 30min exposure in low temperature -55℃,sample weight 10Kg Al
        CJ602SII condition 1 exposure in high temperature 125℃,exposure in low temperature -40℃,exposure duration 30min, sample weight 20Kg Al
        condition 2 30min exposure in high temperature 150℃, 5 min in environment temperature,30min exposure in low temperature -55℃,sample weight 20Kg Al
        condition 3 exposure in high temperature +150℃,exposure in low temperature -55℃,exposure duration 30min, sample weight 10Kg Al
        CJ603S3I condition 1 exposure in high temperature 125℃,exposure in low temperature -40℃,exposure duration 30min, sample weight 20Kg Al
        condition 2 30min exposure in high temperature 150℃,5 min in environment temperature,30min exposure in low temperature -55℃,sample weight 10Kg Al
        CJ603S3II condition 1 exposure in high temperature 125℃,exposure in low temperature -40℃,exposure duration 30min, sample weight 20Kg Al
        condition 2 30min exposure in high temperature 150℃, 5 min in environment temperature, 30min exposure in low temperature -55℃, sample weight 20Kg Al
        condition 3 exposure in high temperature 150℃,exposure in low temperature -55℃,exposure duration 30min, sample weight 10Kg Al
        CJ605S3I condition 1 exposure in high temperature 125℃,exposure in low temperature -40℃,exposure duration 30min, sample weight 10Kg Al
        condition 2 30min exposure in high temperature 150℃, 5 min in environment temperature, 30min exposure in low temperature -55℃, sample weight 10Kg Al
        CJ605S3II condition 1 exposure in high temperature 125℃,exposure in low temperature -40℃,exposure duration 30min, sample weight 20Kg Al
        condition 2 30min exposure in high temperature 125℃, 5 min in environment temperature, 30min exposure in low temperature -55℃,sample weight 20Kg Al
        condition 3 30min exposure in high temperature 150℃, 30min exposure in low temperature - 55℃,load 10Kg Al
         
        Structure
        Shell Cold-rolled steel plate with surface spray(ivory)
        Inner wall material Stainless steel plate
         
        Thermal insulation material Polyurethane foam+ superfine glass wool
         
        Refrigeration Refrigerating method
         
        Water cooling
        Refrigerator
         
        Imported compressor
        Test hole one Φ50mm at the left side
        Controller Siemens PLC controller and Siemens color LCD touch screen.
        Data storage and functional interface Native SD data card, RS485 interface, USB interface
        Workroom dimension (mm) D 670 670 670
        W 650 970 970
        H 460 460 780
         
        External dimension (mm)
        D 2245 2245 2245
        W* 1610 1940 1940
        H 2050 2050 2470
        Installed power(KW) Type I 35KVA 50KVA 50KVA
        Type II
         
        38KVA 53KVA 53KVA
        Power supply AC380V 50Hz three phase four wire + ground wire and grounding protection resistance is less than 4Ω
        Standard configuration 1 product operation manuals. 1 test report, 1 certification, 1 quality certificate, 5 printing papers, 2 shelves and 4 racks, 1 ribbon and 1  silicone rubber soft plug with castors
        Satisfy the standards GJB 150.3、GJB 150.4、GJB150.5、GB/T 2423.1、GB/T 2423.2
         
         
         
        Chongqing Yinhe Experimental Equipment CO.,LTD. 2012 渝ICP備09054543號 技術支持:Hansa
        欧美精品九九99久久在免费线_久久国产亚洲欧美久久_欧美91精品久久久久网_久久综合久久综合九色